- Es gibt keine Artikel mehr in Ihrem Warenkorb
- Versand
- Gesamt 0,0 CHF
- Server-, Computer- und Druckerersatzteile
- Notebooks & Ersatzteile
- Server & Computer
- Drucker & Ersatzteile
- Handy-Teile
- Kabel
- Datenspeichergeräte
- Software & Lizenzen
- Gehäusekomponenten
- Gesundheit & Sicherheit
- Autre
- ProAV-Lösungen
- Displays & Monitore
- LED Display Lösungen
- Projektoren
- Konferenzraumausstattung
- Kabel
- Signalmanagement
- Software & Lizenzen
- Halterungen & Möbel
- Audio
- Zubehör
- Autre
- Überwachung & Sicherheit
- Kameras
- Rekorder & Server
- Access Control Systems
- Infrastruktur
- Fire
- Kabel
- Alarmsysteme
- Software & Lizenzen
- Audio
- Peripherie
- Monitore & Displays
- Netzwerk
- Drahtloses Netzwerk
- Kabelgebundenes Netzwerk
- Firewalls & Gateways
- KVM & Konsole
- Kabel
- USVs & Zubehör
- Software & Lizenzen
- Racks & Gehäuse
- Etikettendrucker
- Zubehör
- Autre
- POS & Auto-ID
- Unterhaltungselektronik
- Ton & Bild
- Mobil- und Tablet-Zubehör
- Notebooktaschen
- Computerzubehör
- Kabel
- Smart Home
- Home & Leisure
- Automobil
- Spiele & Gadgets
- Foto & Zubehör
- Tools
- Autre
- Kabel
106,4 CHF
inkl. MwSt.
98,4 CHF
zzgl. MwSt.
Auf Lager
36,8 CHF
inkl. MwSt.
34,0 CHF
zzgl. MwSt.
Auf Lager
Artikel-Nr.: 110900
Marke: Brady
M21-500-430
Polyester tape for M211 M210 BMP21-PLUS BMP21-LAB BMP21 Polyester
67,2 CHF
inkl. MwSt.
62,2 CHF
zzgl. MwSt.
Auf Lager
Beschreibung
Active holder with cig-plug. With spring stud locking. Fits for devices with original skin. With Easy-switching system.
Use an active holder for your Galaxy Tab Active and you will always have a freshly charged battery! The holder provides a neat and comfortable installation - safe and convenient. The holder is equipped with a cig-plug for connection to the vehicle's 12/24 Volt socket. 3A charging. Charging via pogo plug.
This holder is to be used when you want to have your Galaxy Tab Active extra securely in place and still have it easy accessable.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden.
Easy-switching system:
The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
Use an active holder for your Galaxy Tab Active and you will always have a freshly charged battery! The holder provides a neat and comfortable installation - safe and convenient. The holder is equipped with a cig-plug for connection to the vehicle's 12/24 Volt socket. 3A charging. Charging via pogo plug.
This holder is to be used when you want to have your Galaxy Tab Active extra securely in place and still have it easy accessable.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden.
Easy-switching system:
The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
Spezifikationen
Design
| Faltbar | No |
| Kompatibilität | Samsung Galaxy Tab Active 2 SM-T390/SM-T395, Samsung Galaxy Tab Active 3 SM-T570/SM-T575 |
| Konnektivitätstechnologie | Wired |
| Korrekte Nutzung | Car/Indoor |
| Material | Acrylonitrile butadiene styrene (ABS) |
| Mobilgerätetyp | Tablet/UMPC |
| Orientierung | Horizontal |
| Produktfarbe | Black |
| Typ | Active holder |
| Typ der Gerätemontage | Car vent mount |
Ergonomics
| Neigungswinkelbereich | 0 - 17 ° |
| Schwenkwinkel | 360 ° |
Power
| Eingebautes Ladegerät | Yes |
| Kabelloses Laden | No |
| Stromquellentyp | Cigar lighter |
Vendor information
| Brand Name | Brodit |
| Homepage | http://www.brodit.se/product.html?locale=se&id=746224 |
| Warranty | 1 |
Artikeldetails
746003
2026-04-16
Neu
Technische Daten
- Eingebautes Ladegerät
- Yes
- Orientierung
- Horizontal
- Homepage
- http://www.brodit.se/product.html?locale=se&id=746224
- Faltbar
- No
- Konnektivitätstechnologie
- Wired
- Stromquellentyp
- Cigar lighter
- Neigungswinkelbereich
- 0 - 17 °
- Typ
- Active holder
- Brand Name
- Brodit
- Warranty
- 1
- Kompatibilität
- Samsung Galaxy Tab Active 2 SM-T390/SM-T395, Samsung Galaxy Tab Active 3 SM-T570/SM-T575
- Produktfarbe
- Black
- Material
- Acrylonitrile butadiene styrene (ABS)
- Kabelloses Laden
- No
- Korrekte Nutzung
- Car/Indoor
- Mobilgerätetyp
- Tablet/UMPC
- Typ der Gerätemontage
- Car vent mount
- Schwenkwinkel
- 360 °
Besondere Bestellnummern
- ean13
- 7320287462241
- Hersteller-Teilenummer (MPN)
- 746224
16 andere Artikel in der gleichen Kategorie:
Artikel-Nr.: RAM-VB-161-SW1
Marke: RAM Mounts
RAM-VB-161-SW1
VEHICLE SYSTEM 2006- FORD 500 FREESTYLE
475,2 CHF
inkl. MwSt.
439,6 CHF
zzgl. MwSt.
Wird für Sie bestellt
Artikel-Nr.: RAM-HOL-TAB8U
Marke: RAM Mounts
RAM-HOL-TAB8U
Tab-Tite for L- Tablets Tab-Tite Tablet Holder for Apple iPad Pro 9.7 with Case + More, Tablet/UMPC, Passive holder, Car, Black
81,9 CHF
inkl. MwSt.
75,8 CHF
zzgl. MwSt.
Wird für Sie bestellt
55,3 CHF
inkl. MwSt.
51,2 CHF
zzgl. MwSt.
Wird für Sie bestellt
60,1 CHF
inkl. MwSt.
55,6 CHF
zzgl. MwSt.
Wird für Sie bestellt
Holder for Locking