- Non ci sono più articoli nel tuo carrello
- Spedizione
- Totale 0,0 CHF
- Parti per Server, Computer e Stampanti
- Notebook e parti di ricambio
- Server & Computer
- Stampanti e parti di ricambio
- Ricambi telefono cellulare
- Cavi
- Data Storage
- Software e licenze
- Componenti Chassis
- Salute e Sicurezza
- Autre
- Soluzioni ProAV
- Display e monitor
- LED Display Soluzioni
- Proiettori
- Attrezzature per conferenze
- Cavi
- Gestione del segnale
- Software e licenze
- Supporti e mobili
- Audio
- Accessori
- Autre
- Sorveglianza e Sicurezza
- Telecamere
- Registratori e server
- Controllo Accessi
- Infrastruttura
- Fire
- Cavi
- Sistemi di allarme
- Software e licenze
- Audio
- Periferiche
- Monitor e Display
- Network
- POS e Auto-ID
- Consumer Electronics
- Sound & Vision
- Accessori per cellulari e tablet
- Borse per notebook
- Accessori per computer
- Cavi
- Smart Home
- Home & Leisure
- Settore automobilistico
- Giochi e gadget
- Foto e accessori
- Tools
- Autre
- Cavi
- Cavi Video
- Cavi audio
- Cavi Dati
- Cavi di rete
- Cavi di alimentazione
- Cavi di segnale
- Cable Management
Riferimento: ST3450857SS
Marca: Seagate
ST3450857SS _ RFB
Seagate Cheetah 450GB 3.5, 450 GB, 15000 Giri/min, 16 MB, 3.5", SAS
241,1 CHF
tasse incl.
223,0 CHF
tasse escl.
In magazzino
519,6 CHF
tasse incl.
480,7 CHF
tasse escl.
In magazzino
Descrizione
Active holder with cig-plug. With spring stud locking. Fits for devices with original skin. With Easy-switching system.
Use an active holder for your Galaxy Tab Active and you will always have a freshly charged battery! The holder provides a neat and comfortable installation - safe and convenient. The holder is equipped with a cig-plug for connection to the vehicle's 12/24 Volt socket. 3A charging. Charging via pogo plug.
This holder is to be used when you want to have your Galaxy Tab Active extra securely in place and still have it easy accessable.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden.
Easy-switching system:
The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
Use an active holder for your Galaxy Tab Active and you will always have a freshly charged battery! The holder provides a neat and comfortable installation - safe and convenient. The holder is equipped with a cig-plug for connection to the vehicle's 12/24 Volt socket. 3A charging. Charging via pogo plug.
This holder is to be used when you want to have your Galaxy Tab Active extra securely in place and still have it easy accessable.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden.
Easy-switching system:
The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
Specifiche
Design
| Compatibility | Samsung Galaxy Tab Active 2 SM-T390/SM-T395, Samsung Galaxy Tab Active 3 SM-T570/SM-T575 |
| Connectivity technology | Wired |
| Device mount type | Car vent mount |
| Foldable | No |
| Material | Acrylonitrile butadiene styrene (ABS) |
| Mobile device type | Tablet/UMPC |
| Orientation | Horizontal |
| Product colour | Black |
| Proper use | Car/Indoor |
| Type | Active holder |
Ergonomics
| Swivel angle | 360 ° |
| Tilt angle range | 0 - 17 ° |
Power
| Built-in charger | Yes |
| Power source type | Cigar lighter |
| Wireless charging | No |
Vendor information
| Brand Name | Brodit |
| Homepage | http://www.brodit.se/product.html?locale=se&id=746224 |
| Warranty | 1 |
Dettagli del prodotto
746003
2026-07-27
Nuovo
Scheda tecnica
- Caricatore incorporato
- Yes
- Orientierung
- Horizontal
- Homepage
- http://www.brodit.se/product.html?locale=se&id=746224
- Ripiegabile
- No
- Konnektivitätstechnologie
- Wired
- Stromquellentyp
- Cigar lighter
- Neigungswinkelbereich
- 0 - 17 °
- Typ
- Active holder
- Brand Name
- Brodit
- Warranty
- 1
- Kompatibilität
- Samsung Galaxy Tab Active 2 SM-T390/SM-T395, Samsung Galaxy Tab Active 3 SM-T570/SM-T575
- Produktfarbe
- Black
- Material
- Acrylonitrile butadiene styrene (ABS)
- Kabelloses Laden
- No
- Korrekte Nutzung
- Car/Indoor
- Mobilgerätetyp
- Tablet/UMPC
- Typ der Gerätemontage
- Car vent mount
- Schwenkwinkel
- 360 °
Riferimenti Specifici
- ean13
- 7320287462241
- MPN
- 746224
16 altri prodotti della stessa categoria:
215,1 CHF
tasse incl.
199,0 CHF
tasse escl.
Verrà ordinato per te
Marca: Ergonomic Solutions
NEX201-MN-02
Nexgo Exadigm N5 & ITOS CM5 Cradle MultiGripT (no handle) - BLACK
30,9 CHF
tasse incl.
28,6 CHF
tasse escl.
Verrà ordinato per te
Marca: Ergonomic Solutions
RESAY006-02
120mm Pole, Duratilt, MG plate for PAX A920Pro w. Cradle -BLACK-
169,7 CHF
tasse incl.
157,0 CHF
tasse escl.
Verrà ordinato per te
Holder for Locking