- Es gibt keine Artikel mehr in Ihrem Warenkorb
- Versand
- Gesamt 0,0 CHF
- Server-, Computer- und Druckerersatzteile
- Notebooks & Ersatzteile
- Server & Computer
- Drucker & Ersatzteile
- Handy-Teile
- Kabel
- Datenspeichergeräte
- Software & Lizenzen
- Gehäusekomponenten
- Gesundheit & Sicherheit
- Autre
- ProAV-Lösungen
- Displays & Monitore
- LED Display Lösungen
- Projektoren
- Konferenzraumausstattung
- Kabel
- Signalmanagement
- Software & Lizenzen
- Halterungen & Möbel
- Audio
- Zubehör
- Autre
- Überwachung & Sicherheit
- Kameras
- Rekorder & Server
- Access Control Systems
- Infrastruktur
- Fire
- Kabel
- Alarmsysteme
- Software & Lizenzen
- Audio
- Peripherie
- Monitore & Displays
- Netzwerk
- Drahtloses Netzwerk
- Kabelgebundenes Netzwerk
- Firewalls & Gateways
- KVM & Konsole
- Kabel
- USVs & Zubehör
- Software & Lizenzen
- Racks & Gehäuse
- Etikettendrucker
- Zubehör
- Autre
- POS & Auto-ID
- Unterhaltungselektronik
- Ton & Bild
- Mobil- und Tablet-Zubehör
- Notebooktaschen
- Computerzubehör
- Kabel
- Smart Home
- Home & Leisure
- Automobil
- Spiele & Gadgets
- Foto & Zubehör
- Tools
- Autre
- Kabel
Artikel-Nr.: ST3450857SS
Marke: Seagate
ST3450857SS-RFB
Seagate Cheetah 450GB 3.5, 450 GB, 15000 RPM, 16 MB, 3.5", SAS
241,1 CHF
inkl. MwSt.
223,0 CHF
zzgl. MwSt.
Auf Lager
519,6 CHF
inkl. MwSt.
480,7 CHF
zzgl. MwSt.
Auf Lager
Beschreibung
With tilt swivel. 3A charging. 12/24V. With Easy-switching system. Charging via pogo pins.
The active holder charges your battery when it is in the holder. The charging device connects to the unit automatically when you put the unit in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt.
Easy-switching system:
The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto a Pedestal Mount or an ProClip mounting platform.
The active holder charges your battery when it is in the holder. The charging device connects to the unit automatically when you put the unit in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt.
Easy-switching system:
The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto a Pedestal Mount or an ProClip mounting platform.
Spezifikationen
Design
| Kompatibilität | Zebra TC27, TC22, HC50, HC20 |
| Korrekte Nutzung | Car/Indoor |
| Material | Acetal/Acrylonitrile butadiene styrene (ABS) |
| Mobilgerätetyp | Mobile computer/Mobile phone/Smartphone |
| Produktfarbe | Black |
| Typ | Active holder |
| Typ der Gerätemontage | Screw mount |
Ergonomics
| Neigungswinkelbereich | 0 - 17 ° |
| Schwenkwinkel | 360 ° |
Power
| Eingebautes Ladegerät | Yes |
Vendor information
| Brand Name | Brodit |
| Warranty | 1 |
Artikeldetails
2026-07-23
Neu
Technische Daten
- Eingebautes Ladegerät
- Yes
- Neigungswinkelbereich
- 0 - 17 °
- Typ
- Active holder
- Brand Name
- Brodit
- Warranty
- 1
- Kompatibilität
- Zebra TC27, TC22, HC50, HC20
- Produktfarbe
- Black
- Material
- Acetal/Acrylonitrile butadiene styrene (ABS)
- Korrekte Nutzung
- Car/Indoor
- Mobilgerätetyp
- Mobile computer/Mobile phone/Smartphone
- Typ der Gerätemontage
- Screw mount
- Schwenkwinkel
- 360 °
Besondere Bestellnummern
- ean13
- 7320287123470
- Hersteller-Teilenummer (MPN)
- 712347
16 andere Artikel in der gleichen Kategorie:
67,9 CHF
inkl. MwSt.
62,8 CHF
zzgl. MwSt.
Wird für Sie bestellt
Artikel-Nr.: RAM-HOL-TAB12AU
Marke: RAM Mounts
RAM-HOL-TAB12AU
UNPKD RAM ASSEM TAB-TITE IPAD MIN SLEEVE
55,3 CHF
inkl. MwSt.
51,2 CHF
zzgl. MwSt.
Wird für Sie bestellt
97,2 CHF
inkl. MwSt.
89,9 CHF
zzgl. MwSt.
Wird für Sie bestellt
Marke: RAM Mounts
RAM-316-HDR-202-GMU
RAM Pod HD Reverse Vehicle Mount with 12" Aluminum Rod and Round Plate
248,5 CHF
inkl. MwSt.
229,9 CHF
zzgl. MwSt.
Wird für Sie bestellt
738,5 CHF
inkl. MwSt.
683,2 CHF
zzgl. MwSt.
Wird für Sie bestellt
Active holder with cig-plug