LANCOOL III, the premium mid-tower chassis, offers better thermal performance than LANCOOL II by including 4 pre-installed 140mm PWM fans, and featuring fine mesh panels designed to ensure ample airflow is delivered to the high-end components while the system runs at peak performance.
The LANCOOL III black features a premium hairline brushed aluminum element that looks as good as it feels. The tempered glass panel allows showing off the internal components.
The hinged tempered glass side panels offer an unobstructed view of the interior configuration, while the bottom shroud panels provide quick access to the PSU and storage drives.
The LANCOOL III is optimized for water-cooling and high-end thermal solutions. A maximum of 10 × 120mm fans or a large 420mm radiator can be mounted in the main chamber.
The multi-way front fan bracket offers 4 different ways to mount a radiator or fans to cater to different cooling needs, and features a new latch/handle mechanism to easily secure it in place without the need of the locking thumbscrews.
Mounting slots beside the motherboard are provided at 105mm apart (standard 120mm fan mounting points) to allow the installation of a distro plate or a reservoir/pump bracket.
Multiple storage drive mounting locations are supported for up to 12 x 2.5” SSDs or 4 x 3.5” HDDs and 8 x 2.5” SSDs.
As the second chamber located on the right side is visible, great consideration has been given to cable management. The LANCOOL III features an upgraded solution to ensure neat cable routing with toolless magnetic cable cover doors, and a well-organized layout for hubs and cables.
The removable PSU mounting bracket allows for PSU installation outside of the chassis, to then slide it in through from the rear.
- Mid-tower modular chassis for all kinds of configurations
- Equipped with 4 × 140 PWM fans
- Featured airflow optimized mesh structure and hinged side panels
- Supports up to 420 radiator or 3 x 360 radiators and a maximum of 10 fans
- Offers 12 storage drives mounting locations
- Upgraded cable management solution for a clean build
Spezifikationen
Cooling
| Anzahl der unterstützten hinteren Lüfter (max.) | 1 |
| Anzahl der unterstützten Top-Lüfter (max.) | 3 |
| Anzahl unterstützter Frontlüfter (max.) | 3 |
| Durchmesser der hinteren Lüfter werden unterstützt | 120/140 mm |
| Durchmesser der vorderen Lüfter werden unterstützt | 120/140 mm |
| Fähigkeit zur Flüssigkeitskühlung | Yes |
| Frontlüfter verbaut | 3x 140 mm |
| Lüfter hinten verbaut | 1x 140 mm |
| Top Kühlerlüftergrößen werden unterstützt | 36 cm |
| Top-Lüfterdurchmesser werden unterstützt | 120/140 mm |
| Unterstützte Lüftergrößen für den vorderen Kühler | 360/420 mm |
Design
| An / aus Schalter | Yes |
| Anti-Staub-Filter | Yes |
| Anzahl der 2,5"-Schächte | 8 |
| Anzahl der 3,5-Zoll-Schächte | 4 |
| Formfaktor | Midi Tower |
| Gehärtete Glasscheibe(n) | Yes |
| Kabelmanagement | Yes |
| Material | Aluminium/SGCC/Tempered glass |
| Maximum Grafikkartenlänge | 43.5 cm |
| Maximum Höhe des CPU-Kühlers | 18.7 cm |
| Maximum Netzteillänge | 22 cm |
| Produktfarbe | Black |
| Reset-Knopf | Yes |
| Seitenfenster | Yes |
| Typ | PC |
| Unterstützte Motherboard-Formfaktoren | EATX |
Ports & interfaces
| Anzahl USB 3.2 Gen 1 (3.1 Gen 1) Typ-A Anschlüsse | 2 |
| Anzahl USB 3.2 Gen 2 (3.1 Gen 2) Typ-C Anschlüsse | 1 |
| Audioausgang | Yes |
| Audioeingang | Yes |
Power supply
| Inklusive Netzteil | No |
| Ort der Stromversorgung | Bottom |
| Unterstützte Netzteil-Formfaktoren | ATX |
Storage
| SSD-Formfaktor | 2.5" |
| Unterstützte HDD-Größen | 3.5 " |
Vendor information
| Brand Name | Lian Li |
| Warranty | 1 |