213482

Mounting bracket
Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch screens, PDAs, taximeter screens and printers. You will have your device within easy reach, safe and convenient! The installation is quick and easy and will not damage the interior. Detailed installation instructions included.


INSTALLATION INSTRUCTIONS:
Please read the instructions and look at the pictures carefully before installing the bracket.
This mounting bracket consists of five parts:
Part 1 and 2 - front arms.
Part 3 and 4 - rear arms.
Part 5 - mounting plate.
1. Insert and hook the front arms into the second spacing on each side of the middle of the air vent by the windshield.

2. Press the angled edge of one of the rear arms into the gap below the air vent overhang on the center console. Flip the arm forward so the angled edge hooks behind the panel. Press the front and rear arms together.

3. Repeat step 2 for the other arm. Attach the locking bolts where the front and rear arms meet. Place and attach the mounting plate with the enclosed screws. Lock the arms into place by tighting the large nuts. Important not to pull too hard! Then fixate the locking by using an Allen key.