- Non ci sono più articoli nel tuo carrello
- Spedizione
- Totale 0,0 CHF
- Parti per Server, Computer e Stampanti
- Notebook e parti di ricambio
- Server & Computer
- Stampanti e parti di ricambio
- Ricambi telefono cellulare
- Cavi
- Data Storage
- Software e licenze
- Componenti Chassis
- Salute e Sicurezza
- Autre
- Soluzioni ProAV
- Display e monitor
- LED Display Soluzioni
- Proiettori
- Attrezzature per conferenze
- Cavi
- Gestione del segnale
- Software e licenze
- Supporti e mobili
- Audio
- Accessori
- Autre
- Sorveglianza e Sicurezza
- Telecamere
- Registratori e server
- Controllo Accessi
- Infrastruttura
- Fire
- Cavi
- Sistemi di allarme
- Software e licenze
- Audio
- Periferiche
- Monitor e Display
- Network
- POS e Auto-ID
- Consumer Electronics
- Sound & Vision
- Accessori per cellulari e tablet
- Borse per notebook
- Accessori per computer
- Cavi
- Smart Home
- Home & Leisure
- Settore automobilistico
- Giochi e gadget
- Foto e accessori
- Tools
- Autre
- Cavi
- Cavi Video
- Cavi audio
- Cavi Dati
- Cavi di rete
- Cavi di alimentazione
- Cavi di segnale
- Cable Management
394,2 CHF
tasse incl.
364,7 CHF
tasse escl.
In magazzino
168,5 CHF
tasse incl.
155,9 CHF
tasse escl.
In magazzino
Descrizione
Keep your phone in a holder when on the road and you will always have it within easy sight and reach. The active holder for fixed installation is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior! This holder comes with a USB Type C charging cable. Fits phones with USB Type C charging inlet only.
The adjustable holder fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 12-16 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place). Before using the holder you need to set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.
12 Volt. The product is E-approved. Connect the power cable with a 2A fuse. 2A charger, professional installation recommended.
The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.
This product supports Qualcomm QC 3.0 quick charge (provided the device supports Qualcomm QC 3.0 quick charge).
The adjustable holder fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 12-16 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place). Before using the holder you need to set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.
12 Volt. The product is E-approved. Connect the power cable with a 2A fuse. 2A charger, professional installation recommended.
The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.
This product supports Qualcomm QC 3.0 quick charge (provided the device supports Qualcomm QC 3.0 quick charge).
Specifiche
Design
| Device mount type | Screw mount |
| Material | ABS |
| Mobile device type | Mobile phone/Smartphone |
| Product colour | Black |
| Proper use | Car |
| Type | Active holder |
Ergonomics
| Maximum device depth | 1.6 cm |
| Maximum device width | 8.9 cm |
| Minimum device depth | 1.2 cm |
| Minimum device width | 7.5 cm |
| Tilt angle range | -22 - 22 ° |
Power
| Built-in charger | Yes |
| Power source type | DC |
Vendor information
| Brand Name | Brodit |
| Homepage | http://www.brodit.se/product.html?locale=se&id=527845 |
| Warranty | 1 |
Dettagli del prodotto
2 Articoli
Nuovo
Scheda tecnica
- Caricatore incorporato
- Yes
- profondità massima dispositivo
- 1.6 cm
- Homepage
- http://www.brodit.se/product.html?locale=se&id=527845
- Stromquellentyp
- DC
- Neigungswinkelbereich
- -22 - 22 °
- Typ
- Active holder
- Brand Name
- Brodit
- Warranty
- 1
- Produktfarbe
- Black
- Material
- ABS
- Korrekte Nutzung
- Car
- Mobilgerätetyp
- Mobile phone/Smartphone
- Typ der Gerätemontage
- Screw mount
- Maximum Gerätebreite
- 8.9 cm
- Minimale Gerätebreite
- 7.5 cm
- Minimale Gerätetiefe
- 1.2 cm
Riferimenti Specifici
- ean13
- 7320285278455
- MPN
- 527845
16 altri prodotti della stessa categoria:
Riferimento: RAM-VB-172-SW1
Marca: RAM Mounts
RAM-VB-172-SW1
VEHICLE SYSTEM 2007- FORD EDGE No-Drill Laptop Mount for '13-18 Ford Fusion + More, Laptop, Passive holder, Car, Black
419,8 CHF
tasse incl.
388,3 CHF
tasse escl.
Verrà ordinato per te
37,9 CHF
tasse incl.
35,1 CHF
tasse escl.
Verrà ordinato per te
64,4 CHF
tasse incl.
59,6 CHF
tasse escl.
Verrà ordinato per te
Riferimento: RAM-VB-156-SW1
Marca: RAM Mounts
RAM-VB-156-SW1
VEHICLE SYSTEM 2005- KIA OPTIMA HYUNDIA
399,2 CHF
tasse incl.
369,3 CHF
tasse escl.
Verrà ordinato per te
41,6 CHF
tasse incl.
38,5 CHF
tasse escl.
Verrà ordinato per te
Active holder for fixed installation, 2A charger, Adjustable holder