- Non ci sono più articoli nel tuo carrello
- Spedizione
- Totale 0,0 CHF
- Parti per Server, Computer e Stampanti
- Notebook e parti di ricambio
- Server & Computer
- Stampanti e parti di ricambio
- Ricambi telefono cellulare
- Cavi
- Data Storage
- Software e licenze
- Componenti Chassis
- Salute e Sicurezza
- Autre
- Soluzioni ProAV
- Display e monitor
- LED Display Soluzioni
- Proiettori
- Attrezzature per conferenze
- Cavi
- Gestione del segnale
- Software e licenze
- Supporti e mobili
- Audio
- Accessori
- Autre
- Sorveglianza e Sicurezza
- Telecamere
- Registratori e server
- Controllo Accessi
- Infrastruttura
- Fire
- Cavi
- Sistemi di allarme
- Software e licenze
- Audio
- Periferiche
- Monitor e Display
- Network
- POS e Auto-ID
- Consumer Electronics
- Sound & Vision
- Accessori per cellulari e tablet
- Borse per notebook
- Accessori per computer
- Cavi
- Smart Home
- Home & Leisure
- Settore automobilistico
- Giochi e gadget
- Foto e accessori
- Tools
- Autre
- Cavi
- Cavi Video
- Cavi audio
- Cavi Dati
- Cavi di rete
- Cavi di alimentazione
- Cavi di segnale
- Cable Management
Riferimento: ST3450857SS
Marca: Seagate
ST3450857SS _ RFB
Seagate Cheetah 450GB 3.5, 450 GB, 15000 Giri/min, 16 MB, 3.5", SAS
241,6 CHF
tasse incl.
223,5 CHF
tasse escl.
In magazzino
520,8 CHF
tasse incl.
481,8 CHF
tasse escl.
In magazzino
Descrizione
An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!
You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection). 12/24 Volt. The product is E-approved. Connect the power cable with a 3 A fuse. 3 A charger. Professional installation recommended.
Easy-switching system:
The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Connect the power cable with a 3A fuse. Professional installation recommended. Attach onto a ProClip Mounting Platform or a Pedestal Mount.
You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection). 12/24 Volt. The product is E-approved. Connect the power cable with a 3 A fuse. 3 A charger. Professional installation recommended.
Easy-switching system:
The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Connect the power cable with a 3A fuse. Professional installation recommended. Attach onto a ProClip Mounting Platform or a Pedestal Mount.
Specifiche
Design
| Compatibility | Zebra MC3300 |
| Device mount type | Screw mount |
| Material | ABS/Acetal |
| Mobile device type | Portable scanner |
| Product colour | Black |
| Proper use | Indoor |
| Type | Active holder |
Power
| Built-in charger | Yes |
| Output voltage | 4.75 - 5.3 V |
| Power source type | DC |
Vendor information
| Brand Name | Brodit |
| Homepage | http://www.brodit.se/product.html?locale=se&id=216085 |
| Warranty | 1 |
Dettagli del prodotto
2026-06-25
Nuovo
Scheda tecnica
- Caricatore incorporato
- Yes
- Homepage
- http://www.brodit.se/product.html?locale=se&id=216085
- Stromquellentyp
- DC
- Typ
- Active holder
- Brand Name
- Brodit
- Warranty
- 1
- Ausgangsspannung
- 4.75 - 5.3 V
- Kompatibilität
- Zebra MC3300
- Produktfarbe
- Black
- Material
- ABS/Acetal
- Korrekte Nutzung
- Indoor
- Mobilgerätetyp
- Portable scanner
- Typ der Gerätemontage
- Screw mount
Riferimenti Specifici
- ean13
- 7320282160852
- MPN
- 216085
16 altri prodotti della stessa categoria:
Marca: RAM Mounts
RAM-B-101-C-UN9U
Flat Surface Mount with Long Double Socket Arm and Universal X-Grip Cradle for 10# Large Tablets
326,2 CHF
tasse incl.
301,8 CHF
tasse escl.
Verrà ordinato per te
Active holder for fixed installation, 2A charging, 12/24V