- Non ci sono più articoli nel tuo carrello
- Spedizione
- Totale 0,0 CHF
- Parti per Server, Computer e Stampanti
- Notebook e parti di ricambio
- Server & Computer
- Stampanti e parti di ricambio
- Ricambi telefono cellulare
- Cavi
- Data Storage
- Software e licenze
- Componenti Chassis
- Salute e Sicurezza
- Autre
- Soluzioni ProAV
- Display e monitor
- LED Display Soluzioni
- Proiettori
- Attrezzature per conferenze
- Cavi
- Gestione del segnale
- Software e licenze
- Supporti e mobili
- Audio
- Accessori
- Autre
- Sorveglianza e Sicurezza
- Telecamere
- Registratori e server
- Controllo Accessi
- Infrastruttura
- Fire
- Cavi
- Sistemi di allarme
- Software e licenze
- Audio
- Periferiche
- Monitor e Display
- Network
- POS e Auto-ID
- Consumer Electronics
- Sound & Vision
- Accessori per cellulari e tablet
- Borse per notebook
- Accessori per computer
- Cavi
- Smart Home
- Home & Leisure
- Settore automobilistico
- Giochi e gadget
- Foto e accessori
- Tools
- Autre
- Cavi
- Cavi Video
- Cavi audio
- Cavi Dati
- Cavi di rete
- Cavi di alimentazione
- Cavi di segnale
- Cable Management
Riferimento: ST3450857SS
Marca: Seagate
ST3450857SS _ RFB
Seagate Cheetah 450GB 3.5, 450 GB, 15000 Giri/min, 16 MB, 3.5", SAS
241,1 CHF
tasse incl.
223,0 CHF
tasse escl.
In magazzino
519,6 CHF
tasse incl.
480,7 CHF
tasse escl.
In magazzino
Descrizione
Passive holder with tilt swivel
With your tablet in a holder attached in your car you will always have it within easy reach in the car. Safe, neat and convenient! You can connect e.g. a charging cable to the device when it is in the holder.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden.
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
With your tablet in a holder attached in your car you will always have it within easy reach in the car. Safe, neat and convenient! You can connect e.g. a charging cable to the device when it is in the holder.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden.
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
Specifiche
Design
| Compatibility | Samsung Galaxy Tab A 8.4 (2020) SM-T307 |
| Device mount type | Clamp mount |
| Material | ABS |
| Mobile device type | Tablet/UMPC |
| Product colour | Black |
| Proper use | Car |
| Type | Passive holder |
Ergonomics
| Maximum device depth | 7.1 mm |
| Maximum device height | 12.52 cm |
| Maximum device width | 20.2 cm |
| Maximum screen size | 8.4 " |
| Swivel angle | 360 ° |
| Tilt angle range | 0 - 17 ° |
Packaging data
| Quantity per pack | 1 pz |
Vendor information
| Brand Name | Brodit |
| Homepage | http://www.brodit.se/product.html?locale=se&id=711193 |
| Warranty | 1 |
Dettagli del prodotto
2026-07-20
Nuovo
Scheda tecnica
- profondità massima dispositivo
- 7.1 mm
- Homepage
- http://www.brodit.se/product.html?locale=se&id=711193
- peso massimo dispositivo
- 12.52 cm
- Neigungswinkelbereich
- 0 - 17 °
- Typ
- Passive holder
- Brand Name
- Brodit
- Warranty
- 1
- Kompatibilität
- Samsung Galaxy Tab A 8.4 (2020) SM-T307
- Menge pro Packung
- 1 Stück(e)
- Produktfarbe
- Black
- Material
- ABS
- Maximum Bildschirmgröße
- 8.4 "
- Korrekte Nutzung
- Car
- Mobilgerätetyp
- Tablet/UMPC
- Typ der Gerätemontage
- Clamp mount
- Schwenkwinkel
- 360 °
- Maximum Gerätebreite
- 20.2 cm
Riferimenti Specifici
- ean13
- 7320287111934
- MPN
- 711193
16 altri prodotti della stessa categoria:
30,4 CHF
tasse incl.
28,1 CHF
tasse escl.
Verrà ordinato per te
443,6 CHF
tasse incl.
410,4 CHF
tasse escl.
Verrà ordinato per te
Marca: RAM Mounts
RAM-HOL-GA40
RAM HOLDER GARMIN GPSMAP 78 Form-Fit Cradle for Garmin GPSMAP 73, 78, 78S, 78SC, Navigator, Passive holder, Car, Black
26,8 CHF
tasse incl.
24,8 CHF
tasse escl.
Verrà ordinato per te
211 x 129 x 55 mm, 147 g, 1497 cm³, 17°, 360°, 42x50 mm, 4 mm AMPS