AT-IMC200TP/SC-980

10/100/1000T to 100FX/SC Industrial temperature PoE+ media converter. These converters support 802.3at, PoE+, 30W, LTPoE++ and 4-pair up to 70W. The IMC200TP/SC-980 features Remote Power Cycle and Smart MissingLink™ (SML) and is fanless for silent operation.

Powering remote devices
Allied Telesis IMC200/2000 Series Industrial Media Converters (IMCs) are ideal for powering remote devices, such as IP phones, video cameras and wireless Access Points (APs), which are more than 100m from a Power over Ethernet (PoE) switch. Each IMC can provide up to 70W of PoE.

The 2000T/SP and the 2000TP/SP each feature a 10/100/1000T twisted-pair port, and an SFP port which supports and auto detects 100X and 1000X optics. No switch configuration is needed. Allied Telesis offers a wide variety of SFPs featuring multimode, single mode and BiDi optics.

Models with a fixed fiber-optic port are available with SC or LC connectors. With these, you can achieve distances up to 2 km (100Mps) or 550 m (1000Mps). With the SFP model, you can achieve greater distances using a long-range SFP.

In addition to transmitting data, the twisted-pair port also injects power down the cable, allowing a remote PoE powered device to operate without any additional power source. All PoE+ devices (IEEE802.3at compliant) are supported. All PoE+ devices support 802.3at, PoE+, LTPoE++ and 4-pair. The PC200x PoE+ Series can deliver up to 70W of power to the remote device.

Remote Power Cycle
The IMC200/2000 Series supports the Remote Power Cycle feature. This allows a remote administrator to log in to the host switch device and disable the switch port to which the IMC is attached, causing the PoE+ device to lose power. This allows administrators to reset remote devices without physically going to the location.

Jumbo frame support
Many backbone switch products support the industry-standard IEEE 802.1Q specification for Virtual LANs (VLANs) which sends extra-long data packets on the network. The IMC200/2000 Series are fully compatible with these long packets, enabling them to be used in modern networks.

Smart MissingLink™ (SML)
The SML feature monitors network connections and provides a notification when a link fails, allowing administrators to quickly identify the source and location of failed links, and thus minimize downtime.

Allied Telesis AT-IMC200TP/SC-980. Maximum data transfer rate: 100 Mbit/s, Converter input interface: 10Base-T, 100Base-T, 1000Base-T, Converter output interface: 100Base-FX. Maximum transfer distance: 78740.2" (2000 m), Wavelength: 1310 nm, Tx power (min): -19 dBmW. Product color: Gray, International Protection (IP) code: IP30. Fiber optic connector: SC, Connectivity technology: Wired. Width: 4.37" (111 mm), Depth: 3.78" (96 mm), Height: 1.38" (35 mm)

Maximum data transfer rate	100 Mbit/s
Converter input interface	10Base-T, 100Base-T, 1000Base-T
Converter output interface	100Base-FX
Ethernet interface type	Fast Ethernet
Ethernet LAN data rates	10,100 Mbit/s
Packet forwarding rate (10 Mbps)	14880 pps
Packet forwarding rate (100 Mbps)	148800 pps
Packet forwarding rate (1 Gbps)	1488000 pps
Jumbo frames support	Yes
Jumbo frames	10000
VLAN support	Yes
Auto MDI/MDI-X	Yes
Auto-negotiation	Yes
Store-and-forward	Yes
Maximum transfer distance	78740.2" (2000 m)
Wavelength	1310 nm
Tx power (min)	-19 dBmW
Tx power (max)	-14 dBmW
Rx power (min)	-32 dBmW
Rx power (max)	-3 dBmW
Internal	No
LED indicators	Yes
Product color	Gray
International Protection (IP) code	IP30
DIN rail mounting	Yes
Fiber optic connector	SC
Connectivity technology	Wired
Fiber ports quantity	1
Power over Ethernet plus (PoE+) ports quantity	1
Power over Ethernet (PoE)	Yes
Width	4.37" (111 mm)
Depth	3.78" (96 mm)
Height	1.38" (35 mm)
Weight	26.4 oz (748 g)
Operating temperature (T-T)	-40 - 75 °C
Storage temperature (T-T)	-40 - 85 °C
Operating relative humidity (H-H)	5 - 95%
Storage relative humidity (H-H)	5 - 95%
Operating altitude	0 - 120000" (0 - 3048 m)
Compliance certificates	RoHS
Safety	UL 62368-1, EN 62368-1, UL 60950-1 (UL mark), CAN/CSA C22.2 No. 60950-1 (cUL mark), EN 60950-1 (TUV mark)
Certification	TAA EMI/Emission & Stability FCC Class A EN55024 (immunity standard) EN55032 Class A EN55035 VCCI Class A