39347

The Lindy Cat.6A USB Type C HDBaseT 3.0 Extender is a high-performance, reliable solution for extending AV and data signals over long distances via Cat.6A network cable.

The following distance and resolution combinations are possible when using high-quality Cat.6A or higher U/UTP or F/UTP cable:
70m: 3840x2160@60Hz 4:4:4 8bit / 4:2:2 12bit
100m: 3840x2160@30Hz 4:4:4 8bit / 4:2:2 12bit

Supporting uncompressed resolutions up to 4K Ultra HD, video can be viewed in stunning clarity, while HDR (High Dynamic Range) ensures enhanced brightness, greater contrast, and a much wider colour gamut.

This extender provides fully featured USB Type C input and output ports to connect sources such as a PC or laptop to touchscreens supporting DisplayPort Alternate Mode and USB 2.0 data transfer. The USB Type C charging port on the transmitter delivers up to 100W power to the Type C input when connected to an external power supply.

PoC (Power over Cable) functionality with On/Off switch provides additional flexibility. This allows power to be supplied alongside data through Cat.6A network cable in a point-to-point connection between the transmitter and receiver, meaning only a single power supply is required at one side of the installation.

Users have complete control of the unit via APIs over RS-232 or the USB Type C service port, with EDID presets, copy, user-defined functions, and a pattern generator.
Additional USB 2.0 device ports are available on both the transmitter and receiver, enabling applications such as KVM, collaboration, and meeting room solutions.

The extender also supports any USB Type C DP Alt Mode to Video converter, allowing connections to HDMI® or DisplayPort screens via the receiver's output.

HDBaseT is a globally recognised standard for high-quality distribution of AV content and other technologies, including power and control, over long distances via low-cost Cat.6 or higher cable.

HDBaseT Trademark and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.

Please note: the quoted lengths and resolutions are achievable only with a direct connection between the transmitter and receiver using good quality Cat.6A or higher cable. Using other cable types, couplers, or patch panels may reduce achievable distances.

The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Lindy 39347. Type: AV transmitter & receiver, Maximum resolution: 3840 x 2160 pixels, Cable types supported: Cat6a. Connectivity technology: Wired, USB connector type: USB Type-A, USB Type-C, Serial interface type: RS-232. Power source type: DC, Operating voltage: 24 V. Width: 4.72" (120 mm), Depth: 4.61" (117 mm), Height: 1" (25.5 mm). Package width: 12.6" (320 mm), Package depth: 7.09" (180 mm), Package height: 3.15" (80 mm)

Type	AV transmitter & receiver
Maximum resolution	3840 x 2160 pixels
Cable types supported	Cat6a
Maximum transfer distance	3937" (100 m)
Chipset	VS3000
Extended display identification data (EDID)	Yes
Bandwidth	18 Gbit/s
HDCP	Yes
Material	Metal
HDCP version	2.2
Product color	Black
Connectivity technology	Wired
RJ-45 input ports	1
RJ-45 output ports	1
HDBaseT port	Yes
USB connector type	USB Type-A, USB Type-C
Serial interface type	RS-232
Power source type	DC
Operating voltage	24 V
USB Power Delivery	Yes
Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-20 - 60 °C
Operating relative humidity (H-H)	20 - 80%
Width	4.72" (120 mm)
Depth	4.61" (117 mm)
Height	1" (25.5 mm)
Weight	4.19 lbs (1.9 kg)
Package width	12.6" (320 mm)
Package depth	7.09" (180 mm)
Package height	3.15" (80 mm)
Package weight	4.81 lbs (2.18 kg)
Manual	Yes
Transceiver(s) included	Yes
Compliance certificates	CE, UKCA, Federal Communications Commission (FCC), RoHS, REACH