Philips Unite LED All-in-One LED display 5000 series is designed to engage your audience and delight customers. Perfect viewing experience for all your presentations with vivid colors and deep black contrast makes this display the reliable solution for any meeting rooms, auditorium in corporate or education environments. The Philips Unite LED 5000 is conveniently packaged in one box, with preinstalled and preconfigured modules. No hassle with complex wiring or configuration. It combines convenience, energy efficiency, and superb image quality.
Colour accuracy and contrastThe Philips Unite All-in-One LED displays provide high colour accuracy and a brightness uniformity of
about 97%. The COB Flip Chip LED’s with Matrix technology ensure the deepest black contrast and
most vivid colors.
Energy efficientThe display is energy efficient and is still able to perform up to 600 nit brightness after calibration.
Switch the screen easily to stand by mode and power consumption will be lowered to less than 0.5 Watt. With this low power consumption, the display is still able to start up fast when it is switched on with the included remote control.
Simplified installationSimplified for fast setup, it has never been easier to install a display to wall mount or on optional
trolley within one and half hours with 2 people. Just mount the 5 brackets to the wall and hang the 5
columns on it. Then fix the bottom bar with stereo audio built in and preset cabling.
Everything in oneThe display comes in one box including wall mount brackets. Everything has been pre-configured;
columns are pre-wired and MMR back box and bottom bar are fast to connect to the columns. No
hassle with complex wiring or configuration. Edge finishing trim, control system, stereo audio, built
in wiring. Few cables to connect on the back and ready to run in few steps. Simple.
Powered by AndroidThe user interface can be controlled with a normal remote control as your TV at home. Input source selection, volume- brightness- or contrast are easy to control from your hands. Reliable Android 11
system built in to run apps on a fast integrated SoC (System on chip) platform. Optimised for native
Android apps, it enables you to install web apps and software directly onto the display, eliminating the
need for an external media player.
PPDS WaveUnlock the power, versatility and intelligence inside Philips Unite LED All-in-One LED display remotely
with Wave. This evolutionary cloud platform puts you fully in control, with simplified installation and
setup, monitoring and controlling displays, upgrading firmware, managing playlists and setting power
schedules. Saves you time, energy and environmental impact.
Philips Unite LED 5000. Product design: Digital signage flat panel. Display diagonal: 135", Display technology: LED, Display resolution: 1920 x 1080 pixels, Display brightness: 600 cd/m², HD type: Full HD. Operating system installed: Android 11. Product color: Black
Display diagonal | 135" |
Display technology | LED |
Display resolution | 1920 x 1080 pixels |
Display brightness | 600 cd/m² |
HD type | Full HD |
Touchscreen | No |
LED backlight | Yes |
LED backlighting type | Direct-LED |
Native aspect ratio | 16:9 |
Contrast ratio (typical) | 8000:1 |
Viewing angle, horizontal | 160° |
Viewing angle, vertical | 160° |
Pixel pitch | 0.0591 x 0.0591" (1.5 x 1.5 mm) |
Active display area (W x H) | 118.7 x 69.5" (3015 x 1765 mm) |
Panel life | 100000 h |
Native refresh rate | 60 Hz |
HDMI ports quantity | 2 |
DVI port | Yes |
USB port | Yes |
Ethernet LAN | Yes |
Wi-Fi | No |
HDMI version | 2.0 |
HDMI input ports quantity | 2 |
DVI-I ports quantity | 1 |
DisplayPorts in | 1 |
DisplayPorts out | 1 |
USB ports quantity | 1 |
Ethernet LAN (RJ-45) ports | 1 |
RS-232 interface | Yes |
Remote (IR) input | 1 |
Built-in speaker(s) | Yes |
Number of built-in speakers | 2 |
RMS rated power | 20 W |
Product design | Digital signage flat panel |
Product color | Black |
Placement supported | Indoor |
Orientation | Horizontal |
Screen shape | Flat |
Purpose | Universal |
International Protection (IP) code | IP30 |
Power consumption (typical) | 760 W |
Power consumption (max) | 2260 W |
AC input voltage | 100 - 240 V |
Built-in processor | Yes |
Processor architecture | ARM Cortex-A53+Cortex-A72 |
Internal memory | 4 GB |
On-board graphics card model | ARM Mali-T860 MP4 |
Internal storage capacity | 32 GB |
Operating system installed | Android 11 |
Display width | 23.6" (600 mm) |
Display weight | 418.9 lbs (190 kg) |
Package width | 72" (1830 mm) |
Package depth | 30.7" (780 mm) |
Package height | 41.3" (1050 mm) |
Handheld remote control | Yes |
Batteries included | Yes |
Cables included | AC, RS-232 |
Mounting kit | Yes |
Certification | CE, FCC Part 15 EMC Class-A
EN 55032,EN 55035
EN IEC 61000-3-2
EN 61000-3-3
Class-A, LVD: EN 62368-1 ETL: UL 62368-1 |
Wall mountable | Yes |